Features and specifications:

• Accepts external sensors and input cables for temperature, AC current, 0-2.5 Volt DC and 4-20 mA
• Total "data capacity" is 32,520 measurements
• Programmable start time/date
• Memory modes: stop when full, wrap-around when full
• User-selectable sampling interval: 0.5 sec. to 9 hours, recording times up to 1 year
• Nonvolatile EEPROM memory retains data even if battery fails
• Blinking LED light confirms operation
• Mounting kit included (hook/loop, magnet, and tape)
• Readout and re-launch with optional HOBO Shuttle
• Drop-proof to 5'
• Size/Weight: 2.4 x 1.9 x 0.8" (60 x 48 x 19 mm) /approx. 1 oz (27 grams)
• User-replaceable battery lasts 1 year + Battery level indication at launch
• Operating range: -4°F to +158°F (-20°C to +70°C), 0 to 95% relative humidity, non-condensing, non-fogging
• Time accuracy: ±1 minute per week at +68°F (+20°C)
• NIST-traceable temperature accuracy certification available, compliance certificate available
  

Accepts following external sensors and input cables:

• Temperature
  • Wide Range sensors (40° to 212°F / 4° to 100°C)
    • temperature sensors lengths from 1' to 50'
  • High Accuracy sensors (32°F to 110°F / 0° to 44°C)
  • Stainless steel temperature probe
• AC Current - Split-core AC current sensors ranges
  • 0-20 Amp, 0-50 Amp, 0-100 Amp
  • 0-200 Amp, 0-600 Amp
• 4-20 milliamps (18" / 45cm long)
• 0 to 2.5 Volts DC (6’ / 180cm long)
  • Accuracy: ±10 mV ±1% of reading
  • Resolution: 10 mV (8-bit)
    

Easy Logger Setup

• Select from predefined sampling intervals (0.5 seconds to 9 hours) or program your own custom intervals
• Set start time and memory modes (e.g., stop when full, wrap-around when full)
• Verify logger operation before launching
• Synchronizes logger and data shuttle clocks to computer clock
• Checks battery status

General Features

• Toolbar provides quick access to commonly used functions
• Runs in Windows 3.1x or Windows 95/98/NT (Data archive reader utility for Pro Series only runs in Windows 95/98/NT)
• On-line help
• Readout log provides a summary of saved data logger files
• DOS Utility allows you to launch, readout and save files from PCs that only have MS-DOS

Readout and Data Analysis

• View data in tabular and graphical formats (for the Event, it plots cumulative event data)
• Zoom in on data of interest
• Display multiple plot windows at once
• Copy and paste graphs into other Windows applications
• Cursor highlights points on graph
• Displays alarm lines (loggers)

Export Data files to Spreadsheets

Microsoft Excel, Lotus 1-2-3 or any ASCII-compatible program

Version 3.6 System Requirements
386 or better processor with at least 4M of RAM running Windows 3.1x or Windows 95/98/NT, with at least one available serial port.

Version 3.6 is designed for single users, and has not been tested, and therefore not warranted to run in a network environment.

Easy Logger Setup

• Select from predefined sampling intervals (0.5 seconds to 9 hours) or program your own custom intervals
• Set start time and memory modes (e.g., stop when full, wrap-around when full)
• Verify logger operation before launching
• Synchronizes logger and data shuttle clocks to computer clock
• Checks battery status

Graphing

Powerful new graphing capabilities allow you to compare multiple parameters on one graph, including data from multiple loggers or successive deployments. Then use the zoom and axis-control tools to focus in on the data of interest.

• Add new data series from stored files or drag-and-drop from one plot onto another
• Multiple value axis on one graph, such as temperature and RH
• View data from successive deployments on one graph to see long-term trends
• Overlay data from different deployments, to compare month-to-month, or before-and-after
• Focus on data of interest with powerful zoom and drag tools
• Set axis ranges
• Use cursor to display specific plot values
• Display series data and details such as launch parameters and series statistics
• Add limit lines to the graph
• Copy and paste graphs into other Windows programs
• Control axis, series and legend properties

Analysis Functions

The following analysis functions can be used to extract key information from logged data. These functions actually create new data series, which can be graphed or exported. These functions filter data over user-specified intervals that can be in seconds, minutes, hours or days.

• Min, max and average values per interval

On/off and State logger data:

• Run time and off time (closed time and open time) in seconds
• Percent on and percent off (percent closed and percent open)
• Number of ons and offs (number of opens and closes)

Event logger data:

• Rainfall per time interval
• Number of events

Export Data to other Programs

• Control bar tool for Microsoft Excel export (.TXT format)
• Lotus 1-2-3 and custom export
• International data format options
• Batch export utility

Other Features

• Print graphs and series details
• Print preview
• Multiple logger launch
• Long file names (up to 255 characters)
• International data format options
• Thumbnail view for showing many plots on screen at once

Version 4.0 System Requirements:
Minimum system requirement is 486/66Mhz with at least 16M of RAM running Windows 95/98/NT4 or later with 16-bit color. A Pentium 90 or higher with 24M of RAM is recommended. The system must have at least one available serial COM port and a CD-ROM Drive.

Version 4.0 is designed for single users, and has not been tested, and therefore not warranted to run in a network environment.