| 
       
      
      
       
      
      
        
         Ozone
              Generators & Accessories 
          | Will
              all of your Ozone Accessories work with any Ozone Generator? - Answer |  
          | I am
              considering purchasing a Cold Plasma Ozone Generator because I've
              been told that it produces no heat. Is this true? - Answer |  
          | I have
              noticed that your ozone generators are not CSA or UL approved.
              Why is that, and are they any less safe than those that are? - Answer |  
          | We believe
              that ozone levels in a particular air filled enclosure is contributing
              to deterioration of components sharing the same housing. We know
              that some components in the housing generate ozone, yet are unsure
              how to quantify the levels. Can you suggest the appropriate hardware
              to use? - Answer |  
          | Having
              12 volt systems is really great. I know that I can use cigarette
              lighters in cars, boats, etc. to power my 12VDC Ozone Generator,
              but what if I need something even more portable? - Answer |  
          | I own
              a 12VDC GE60 Ozone Generator. I will be using it in places where
              there is only a 12VDC system, but I have other electrical devices
              which require standard household current. Do you have any suggestions? - Answer |  
          | The
                silicone tubing provided with your products appears to be stronger
                then the silicone tubing I have seen offered by other suppliers.
                I would appreciate your feedback. - Answer |  
          | Is it safe to use other than silicon or PTFE-Teflon™              tubing on the 
            OUTLET (ozone side) 
of your ozone instruments?
 - Answer |        
      
      
       
      
      
        
          | We believe
              that ozone levels in a particular air filled enclosure is contributing
              to deterioration of components sharing the same housing. We know
              that some components in the housing generate ozone, yet are unsure
              how to quantify the levels. Can you suggest the appropriate hardware
              to use? - Answer |   Ozone
              Destructors, Monitors & Gas Analyzers 
          | Will
              the ozone analyzer OGA/C you suggested for measuring of ozone generator
              output produce the reading in pounds per day? - Answer |  
          | How effective
              is the ozone destructor and how would I know if it still effective?
              Do I need to change the element in the destructor? If yes, how
              often? - Answer |  
          | I would
              like to know when I should replace my catalytic ozone destructor
              with a new one? I know what the destructor is made of - how long
              does it function normally? - Answer |  
          | What
              are the safety issues associated with ozone exposure in a laboratory
              setting? My main concern is personnel health effects. I've heard
              that ozone affects mucous membranes and can cause minor discomfort,
              but are there more serious health effects? My ozone exposure is
              from operating a Tesla coil in room air. Should I be concerned
              about breathing the ozone from this for extended periods (intermittent
              exposure for up to 30-60 minutes, possibly several times per day)? - Answer |        
      
      
       
      
      
        
        
        
        
          | What
              are the safety issues associated with ozone exposure in a laboratory
              setting? My main concern is personnel health effects. I've heard
              that ozone affects mucous membranes and can cause minor discomfort,
              but are there more serious health effects? My ozone exposure is
              from operating a Tesla coil in room air. Should I be concerned
              about breathing the ozone from this for extended periods (intermittent
              exposure for up to 30-60 minutes, possibly several times per day)? - Answer |  
          | We believe
              that ozone levels in a particular air filled enclosure is contributing
              to deterioration of components sharing the same housing. We know
              that some components in the housing generate ozone, yet are unsure
              how to quantify the levels. Can you suggest the appropriate hardware
              to use? - Answer |  
       
 
       
        
        
        
        
          | Couldn't
              someone "preserve" the ozone in the water they make by
              simply capping the bottle tightly with a silicon rubber cork or
              equivalent? I wonder how long water would remain "ozonated" if
              this is done? - Answer |  
          | Can you
              please tell me more about the following: In general, does Bromine & Ozone
              do a better job than Chlorine & Ozone for pools? Also, where
              would I purchase a device to test the ozone levels in my pool and
              hot tub. - Answer |  
          | We have
              a hot tub and are comparing Ozone versus Hydrogen Peroxide. Which
              do you feel is better? - Answer |  
          | What
              determines the final levels of ozone in water? - Answer |  
          | What
              is Gamma and its conversion to ozone levels in water? - Answer |  
          | I am
              concerned about my drinking water. Would it be better to use a
              RO unit to treat the water along with or separate from the ozone
              generator? - Answer |  
          | I would
              like to know how to mix Ozone into water - I need the easiest and
              best way? - Answer |  
          | I am
              looking for the least toxic, healthiest way to maintain a hot tub
              without chemical shock. I an using a copper/silver sanitation system,
              but am still told I need an "oxidizer" to burn off organics
              when I exit the spa (bromine, chlorine, potassium monopersulphate). - Answer |  
          | Can you
              tell me more about Ozonation with Bromine or Chlorine in pools. - Answer |        
      
      
 
       
        
        
        
        
          | Why don't
              more people use H2O2 in their pools? I would
              like to switch, how expensive is it, is it difficult to switch,
              etc. - Answer |  
          | Do you
              know of a device that can test the level of hydrogen peroxide in
              water? Also I am interested in testing the level of hydrogen peroxide
              in 35% food grade hydrogen peroxide. - Answer |  
          | We have
              a hot tub and are comparing Ozone versus Hydrogen Peroxide. Which
              do you feel is better? - Answer |  
          | I am
              looking for the least toxic, healthiest way to maintain a hot tub
              without chemical shock. I an using a copper/silver sanitation system,
              but am still told I need an "oxidizer" to burn off organics
              when I exit the spa (bromine, chlorine, potassium monopersulphate). - Answer |  
       
       
      
      
        
        
        
        
          | My order
              is overdue. What would you suggest that I do? - Answer |  
 |